Skip to main content

Status Audio CB-1 review

Status Audio's CB-1 studio headphones sound so good, you won't believe the price

While there are plenty of over-ear headphones available for under $100, very few of them are marketed as studio monitors. A good pair of studio monitors should have crystal-clear sound, a flat or neutral frequency balance, and good isolation for recording, editing, and mixing in a studio environment. These qualities often come at a premium, so in our Status Audio CB-1 review we wanted to find out if these $79 closed-back headphones are actually worthy of being called studio monitors.
Recommended Videos

Status Audio is an extremely low-profile brand which has eschewed logos and big advertising in favor of a direct-to-consumer strategy in order to keep their costs, and subsequently the price tag for their products, low. With the Audio CB-1, pricier materials like metal and natural leather which might be used in more expensive headphones were substituted with more cost effective plastic and synthetic fabric. While the result is that the CB-1 look a bit cheap and lack a refined aesthetic, Status didn’t skimp on the features that count.

While we weren’t expecting much from the sound quality, we were blown away after putting these on. The soundstage is wide and deep with good stereo imaging delivering accurate instrumental placement. Much like the Audio-Technica ATH-M50x, the balance is neutral without much emphasis in any particular frequency range. This helps avoid fatigue during extended listening sessions, but may sound somewhat dull to ears accustomed to a more sculpted sound signature, like the exaggerated bass of Beats headphones or models from V-Moda.

We did note a slight degradation in sound performance and some additional sibilance in the higher frequencies at louder volumes, and despite being closed back, the CB-1’s isolation didn’t always block out a lot of ambient noise. However, at moderate listening volumes sound bleeding was minimal.

We weren’t expecting much from the sound quality but were blown away after putting these on.

Given that the body is constructed mostly from plastic, the CB-1 headphones are also fairly lightweight. Despite that, they feel sturdy and flexible, with enough clamping force to keep the headphones in place without gripping your head like a vice. They thickly padded earcups are extremely comfortable, as is the head cushion wrapped in vegan leather. The headphones also fold down compactly for storage but unfortunately don’t come with a travel case.

Accessories include two detachable cables: A 10-foot straight cable and a compact coiled cable for various studio applications. The cables are both thick and durable with gold-plated connectors and a threaded male end for use with the included 1/4-inch adapter. The opposite ends have twist-lock connectors that secure into the base of the left ear cup, although a standard audio cable could be used as well. However, neither cable has a remote for playback control nor a mic for hands-free calling with a mobile device.

Generic looks aside, the Status Audio CB-1 headphones definitely favor sound over style, and considering the sound performance that you get from them, $79 is a remarkable price point. While you can very easily spend twice as much, budget musicians, budding engineers, and even regular listeners may want to give the CB-1 a try.

Philip Chung
Former Digital Trends Contributor
Philip is an industrial engineer who truly enjoys writing and exploring new tech products. He started writing reviews in 2010…
Ifi says its latest portable DAC restores the missing quality in digital audio
Ifi Go Bar Kensei.

Wired headphone and in-ear monitor (IEM) fans now have a new option when it comes to hearing bit-perfect digital audio on the go: Ifi's new $449 Go Bar Kensei takes one of the best portable headphone DAC/amps and adds two made-in-Japan technologies.

On the outside, the Go Bar Kensei's chassis is made from Japanese stainless steel -- an homage to the blades wielded by legendary Japanese swordsmen that also lends the DAC better structural integrity.

Read more
1More’s PistonBuds Pro Q30 look like great budget buds at $50
1More PistonBuds Pro Q30 in black/gold.

The new PistonBuds Pro Q30 from 1More boast AirPods-like looks along with active noise cancellation (ANC) and spatial audio, but it's their rock-bottom $50 price that stands out. As part of the launch, 1More has dropped the price to $40 for a limited time, making these wireless earbuds even more attractive. The PistonBuds Pro Q30 are available in white/gold or black/gold combos.

In the past, 1More has favored a stemless design for its PistonBuds lineup, but this time the company has opted for a stem-based approach. If you've ever tried PistonBuds in the past and found them a poor fit, this new shape might be a better option.

Read more
1More’s new wired earbuds pack five drivers and planar tech for $170
1More Penta Driver P50 wired in-ear earbuds.

The new wired earbuds from 1More appear to be a technical tour de force. The Penta Driver P50 use five drivers per earbud and feature detachable MMCX connections. That's what you might expect to find in a set of high-end in-ear monitors (IEMs), not a set of $170 wired earbuds, and yet that's what the Penta Driver will cost when they go on sale in mid-September.

Multi-driver wired earbuds (and increasingly wireless earbuds) aren't that unusual. The existing Triple Driver and Quad Driver earbuds from 1More are a testament to that. However, inside the Penta Driver is multi-driver combination I don't think we've ever seen before: a diamond-like carbon (DLC) dynamic driver has been layered with four "planar diaphragm" drivers.

Read more