Skip to main content

Razer jumps into the wireless networking market with an updated Portal router

Portal Wi-Fi router
Image used with permission by copyright holder
After revealing a smartphone in early November, Razer said on Thursday, December 7 that it is collaborating with Ignition Design Labs on an update to the latter company’s Portal wireless router. The device promises lag-free gaming using “key technologies,” such as the use of new 5GHz channels not typically offered on most wireless AC routers. Portal is also an AC2400 Wave-2 device, meaning it’s capable of reaching theoretical wireless speeds of up to 1,733Mbps.

According to Ignition Design Labs, Portal includes nine “large” internal antennas that handle four incoming and four outgoing 5GHz Wireless AC streams (433Mbps each), and three incoming and three outgoing Wireless N streams (200Mbps each). Two antennas may be dedicated to communicating with a second Portal router to create mesh-based coverage throughout your house.

Recommended Videos

The router includes four gigabit Ethernet ports for the local network, another gigabit Ethernet port that connects to your modem, and two USB-A 2.0 ports for sharing files, printers, and more across the home network. There’s also a Bluetooth 4.1 low-energy component for configuring the device using a smartphone, and for communicating with IoT devices.

The big selling point behind Portal is the FastLanes aspect. The router relies on the standard channels used on the 5GHz spectrum but introduces four additional channels (FastLanes) that are typically used for commercial and military purposes. These channels fall under the Dynamic Frequency Selection umbrella and can be used only if the router can automatically switch channels if it detects active radar signals in the local area.

To put this in perspective, all channels on the 2.4GHz spectrum are congested given that most electronic devices with a wireless component use this space. The 5GHz spectrum was a big sell because it was less congested, thus providing faster speeds. But now that those channels are filling up with Wireless N and Wireless AC devices, previously unused “reserved” channels are wide open and ripe for exploring … but only under certain conditions imposed by the Federal Communications Commission.

At its root, Portal is a mesh networking device. It connects directly to your modem and can serve as the central wireless access point in your home with a 3,000-square-foot spread. But it can also communicate with one additional Portal unit to create mesh-based coverage providing double the distance. Connecting devices will only see one access point on their list of wireless networks, and will move seamlessly between the two units as you move throughout the home.

So what is Razer’s involvement with a router already sold on the market? The announcement wasn’t specific, stating only that the companies “collaborated to optimize features and performance of the Portal router specifically for gaming.” Razer’s product listing also mentions multichannel ZeroWait ZWDFS technology, which doesn’t appear on Ignition Design Labs’ own product listing for the router.

But in an email to Digital Trends, a representative for Razer said the two only collaborated on the software side of the router.

“From improving setup experience, gaming features like QoS as well as cloud connectivity to improve active traffic avoidance, we’re just getting started on optimizing Portal for gamers,” the spokesperson said. Razer is also playing a part in getting the router certified around the world.

Razer is selling the router now through its website for $150, and will make it available worldwide in the first quarter of 2018.

Update: Added Razer’s response.

Kevin Parrish
Former Digital Trends Contributor
Kevin started taking PCs apart in the 90s when Quake was on the way and his PC lacked the required components. Since then…
Best early GPU Black Friday deals: Save on top graphics cards now
The Gigabyte RX 6750 GRE graphics card over a dark background.

Building a PC from scratch can be a lot of fun, and with the upcoming Black Friday on November 29, it's a perfect time for you to pick up hardware. One of the most fun bits of any build is picking the parts, and for that, graphics cards are probably the most fun to pick between. That said, GPUs also tend to be the most expensive pieces of hardware that go into a desktop, especially if you're trying to aim for something in the mid-to-high-end range that can easily reach $500 or even $1,000. That's why we've gone out and collected some of our favorite early Black Friday GPU deals for you below.
GIGABYTE NVIDIA GeForce RTX 3060 -- $290 $350 17% off

This RTX 3060 is a great starter card for those who want to be on a budget and will handle most slightly older games pretty well at 1080p and 60Hz, potentially up to 100. It may struggle a bit with newer titles without compromises, but that's fine given the reduced $290 price point.

Read more
Nvidia just scaled down DLSS 3, and that’s a good thing
The RTX 4080 Super graphics card sitting on a pink background.

Nvidia's signature tech, DLSS 3, just got yet another update -- and although it's subtle, it actually seems like a good thing for some of the best graphics cards. The latest version, 3.8.10, bundled with the GeForce 566.14 driver, doesn't seem to introduce any major changes, but Nvidia enthusiasts noticed that it's about half the size that it used to be. Where's that difference coming from?

No, Nvidia didn't downgrade DLSS 3 -- at least not in any major way. Although this hasn't been confirmed by Nvidia itself, it appears that the company removed a whole bunch of DLSS presets and replaced them with just two. These presets make it easier for gamers to choose the type of focus they want to apply to each game.

Read more
HP has an entirely new take on laptops with foldable screens
HP Spectre Foldable PC front view showing full length display and separate keyboard.

HP has released a patent detailing ideas for its latest take on a foldable laptop, as spotted by MSPoweruser. According to the diagrams in the document, the device would close like a many of the conventional best laptops, and then the sides of the extra-wide display would fold around the bottom of the PC.

When closed, the device would be about the size of a normal laptop, just a little thicker. The diagrams are drawn for clarity, however, and don't reflect how thick the product would actually be.

Read more