Skip to main content

NASA’s Perseverance rover is stacked and ready for launch to Mars

NASA’s Perseverance rover is gearing up for its mission to Mars in just two months’ time. The latest step in the launch preparations is readying the rover and its descent stage to be attached to the Atlas V rocket that will transport it in a process called vehicle stacking.

The rover’s descent stage, along with some other components including the recently-name Ingenuity helicopter, is carefully lifted and placed on top of the rover itself, then attached with three flight-separation bolts. The combined package is then placed inside a black shell along with its parachute, ready to be set onto the rocket.

Recommended Videos

“Attaching the rover to the descent stage is a major milestone for the team because these are the first spacecraft components to come together for launch, and they will be the last to separate when we reach Mars,” David Gruel, the Perseverance rover assembly, test, and launch operations manager at NASA’s Jet Propulsion Laboratory said in a statement. “These two assemblies will remain firmly nestled together until they are about 65 feet [20 meters] over the surface of Mars.”

 the rocket-powered descent stage
This image of the rocket-powered descent stage sitting on to of NASA’s Perseverance rover was taken in a clean room at Kennedy Space Center on April 29, 2020. NASA/JPL-Caltech

Once the spacecraft arrives at Mars, the three bolts holding the descent stage and the rover together will be released using pyrotechnic charges, allowing a part of the decent procedure called the “sky crane maneuver” to begin.

Please enable Javascript to view this content

Because the Perseverance rover is larger and heavier than previous Mars rovers, it cannot use an airbag landing system like those before the Curiosity rover. Instead, the sky crane system has nylon ropes hanging from the descent stage which hold the rover in place 25 feet (7.6 meters) below. When the rover touches down on the surface, it senses the contact and uses blades to cut the ropes, allowing the descent stage to lift off and move away. The advantage of this system is that Perseverance will land neatly on the surface with no parts of airbags or other components in its way.

The launch of the rover is scheduled for summer this year, will a launch window opening on July 17. If everything goes as planned, the rover should land on Mars in the Jezero Crater on February 18 2021, where it can begin its mission of searching for signs of ancient life.

Georgina Torbet
Georgina has been the space writer at Digital Trends space writer for six years, covering human space exploration, planetary…
SpaceX to launch NASA’s Dragonfly drone mission to Titan
Caption: Artist’s concept of Dragonfly soaring over the dunes of Saturn’s moon Titan.

Over the last few years, the Ingenuity helicopter on Mars made history by proving it was possible to fly a rotorcraft on another planet. And soon NASA will take that concept one step further by launching a drone mission to explore an even more distant world: Saturn's icy moon of Titan.

The Dragonfly mission is set to explore Titan from the air, its eight rotors keeping it aloft as it moves through the thick atmosphere and passes over the rough, challenging terrain below. The aim is to look for potential habitability, studying the moon to work out if water-based or hydrocarbon-based life could ever have existed there.

Read more
Check out this incredible panorama of Mars taken by Curiosity
NASA’s Curiosity captured this panorama using its Mastcam while heading west away from Gediz Vallis channel on Nov. 2, 2024, the 4,352nd Martian day, or sol, of the mission. The Mars rover’s tracks across the rocky terrain are visible at right.

The Curiosity rover has been on Mars since 2012, and in that time it has driven more than 20 miles -- which might not sound like a lot, but is a long distance for a rover traveling at slow, careful speeds that are somewhat less than the average garden snail. The rover has now reached the end of an area it has been exploring for the past year -- a channel called Gediz Vallis -- but before it moved on, the rover snapped a series of images of the area, which you can explore in this NASA panorama:

Key features are marked on the panorama, including the route along which the rover will exit the channel, as well as the tracks that lead back to show the direction the rover came in. In the far distance you can see the rim of the Gale Crater, which is the larger area that Curiosity is exploring, and the Pinnacle Ridge, which is formed from a mound of debris that scientists are still studying.

Read more
Relive NASA’s debut launch of its mighty SLS rocket on second anniversary
NASA's SLS rocket launching at the start of the Artemis I mission.

NASA’s Artemis I Moon Mission: Launch to Splashdown Highlights

Two years ago, on November 16, NASA performed the maiden launch of its Space Launch System (SLS) mega moon rocket that carried an uncrewed Orion spacecraft to orbit in a mission and marked the official start of the U.S. space agency’s ambitious Artemis program.

Read more