Skip to main content
  1. Home
  2. Audio / Video
  3. News

Fiio’s BTR13 is a budget-priced DAC that does it all

By
Fiio BTR13 DAC.
Fiio

With lossless and hi-res audio gaining in awareness and popularity, more people are looking into how they can use digital-to-analog converters (DACs) to help them get the most from their streaming services and their existing audio equipment. For these folks, Fiio’s new BTR13 may be the perfect entry point into the world of DACs, as it supports a wide variety of setups and at just $64 is one of the most affordable DACs you can buy. The BTR13 hits the usual retail outlets in September.

Fiio BTR13 DAC.
Fiio

Available in black or blue, the BTR13 has two headphone outputs: a standard 3.5mm unbalanced jack, along with the increasingly popular 4.4mm balanced connection. A .96-inch color screen displays audio format and sampling rate, plus the current EQ mode. On the side, you’ll find a physical switch for moving between the BTR13’s three modes: phone, Bluetooth, and PC, plus dedicated buttons for volume, power, and play/pause.

Recommended Videos

When connected to a computer via the included USB-C cable, the BTR13 runs off the PC or Mac’s power, but when connected to a phone or used as a Bluetooth receiver, the DAC can use its internal battery for up to a claimed 8 hours. Fiio doesn’t include a lightning-to-USB-C cable for older iPhones, but the BTR13 will work with third-party OTG-compliant lightning adapters.

Fiio BTR13 DAC.
Fiio

The DAC can work with any PCM audio up to 24-bit/96kHz, converting it to analog via dual CS43131 DAC chips. That sadly falls short of the full range of available hi-res audio, which can go as high as 192kHz, and there’s no support for DSD or MQA.

Please enable Javascript to view this content

However, you can use it with popular game consoles like the PlayStation 5 or Nintendo Switch, thanks to its available UAC 1.0 mode — something that isn’t always available on DACs.

In Bluetooth receiver mode, the BTR13 is compatible with a wide variety of Bluetooth codecs, including SBC, AAC, aptX, aptX LL, aptX Adaptive, aptX HD, and LDAC. Along with its built-in belt clip, this makes the BTR13 a good way to use your favorite wired in-ear monitors or headphones without a physical connection to your phone or computer.

For even greater control over the sound, you can use Fiio’s mobile app or web portal to access a 10-band parametric equalizer (PEQ) or you can use FiiO’s preset sound effects and headphone curves.

Editors’ Recommendations

Topics
Simon Cohen
Simon Cohen
Contributing Editor, A/V
Simon Cohen is a contributing editor to Digital Trends' Audio/Video section, where he obsesses over the latest wireless…
Sonos Arc vs. Sonos Arc Ultra: Is the next-gen worth the splurge?
Sonos Arc Ultra.

The Sonos Arc has long stood as the flagship soundbar from the American networked audio giant. Upon its release in 2020, the Arc established itself as one of the most feature-rich products in its category. It was Sonos's first soundbar to support Dolby Atmos, which was a significant step forward at the time.

Four years later, the Sonos Arc Ultra was released, intended to take up the mantle of a premium flagship soundbar. The Arc Ultra represents the next generation for Sonos, features breakthrough technologies like "Sound Motion," and adds Bluetooth support for the first time in any Sonos soundbar.

Read more
You Asked: What’s the most impressive thing you saw at CES?
You Asked CES Editors Cut

On today’s special edition of You Asked, we tracked down each of our editors and put them on the spot to find out what they thought was the most impressive thing they saw at CES 2025 in Early January. Let’s find out what they had to say.
Panasonic Z95B

There’s been some really cool TV tech at CES, but the thing I’m most excited about is the new Panasonic Z95B. Instead of the regular OLED display structure we’ve seen in recent years with MLA technology, this uses a four-layer panel structure. It features individual red, green, and blue layers (two of the latter) for the emissive light.

Read more
Fiio brought its adorable KA15 DAC/amp to CES 2025 and now I want one
Fiio KA15 mobile headphone DAC/amp.

I admit it: Even though my job means I'm supposed to be laser-focused on sound quality, usability, value for money, and durability, every now and then, I see an audio product that I want to own simply because it looks awesome. That was my reaction at CES 2025 when I laid eyes on Fiio's KA15 -- a tiny mobile headphone DAC/amp that sells for $110 (though as of today's date, it's down to $90 on Amazon).

Specs-wise, this little all-aluminum, baby blue and silver gadget -- which also comes in a much more serious Midnight Black color -- covers everything you could want in a headphone DAC: support for PCM decoding up to 32-bit/768kHz, plus native DSD decoding up to DSD256, dual Cirrus Logic CS43198 DACs, a companion app and web interface that gives you access to a 10-band parametric equalizer, 4.4mm balanced and 3.5mm unbalanced headphone jacks, an ultra-low THD of 0.0004%, and up to 560 milliwatts of power per channel (when in desktop mode). Perfect for getting the most out of your lossless and hi-res audio sources via wired headphones or IEMs.

Read more