Skip to main content

Stingrays, V8s, and plastic: What makes a Corvette a Corvette

1968 Chevrolet CorvetteThe seventh-generation Corvette, known as C7 to its close friends, will be unveiled in Detroit on January 13, and it’s a momentous occasion for even fair-weather gearheads. After 60 years of continuous production, the ‘Vette has earned the title “America’s sports car,” but why? What has kept the Corvette going all these years? What makes a Corvette a Corvette?

1953 Chevrolet CorvetteTwo-seat sports car

At its most elemental, the Corvette is a two-seat sports car made by Chevrolet. While serving in Europe during WWII, a generation of Americans were exposed to nimble sports cars like the MG TD, and when they came home, Chevy was more than happy to give them an American version.

Recommended Videos

What Chevy came up with in 1952 was a fiberglass-bodied sports car with the engine set as close to the firewall as possible, for better weight distribution. Chevy’s only engine at the time was the “Blue Flame” inline-six, which produced an underwhelming 150 horsepower. Luckily, European sports cars prioritized handling over raw power.

Fittingly, Chevy named its sports car after a type of warship that served as a fast, agile convoy escort in both World Wars.

Today’s Corvette has little in common with an MG. That’s because it has evolved into a uniquely American sports car. The inline-six was ditched almost immediately for a V8 (more on that in a minute), and the Corvette grew in both size and capability.

Corvette LT1 engine cutawaySmall-block V8

It just wouldn’t be a Corvette without Chevy’s small-block V8, which has been in continuous production since 1955. That first small-block displaced 4.3 liters and produced 195 hp. The small-block in a 2012 Corvette ZR1 displaces 6.2 liters, and produces 638 hp.

Like the rest of the Corvette, the small-block has constantly evolved over the years. The only things a 2012 small-block shares with the 1955 original are a 4.4-inch bore spacing, 90-degree V angle, and pushrods.

Still, even constant refinement isn’t always enough. The small-block’s lack of efficiency-boosting overhead camshafts, along with its large displacement, have led some to consider replacing it with everything from a Wankel rotary engine to a twin-turbo V6.

The C7’s LT1 engine is still a pushrod small-block, but it stays relevant with new-to-Corvette technologies, including: direct injection, variable valve timing, and a cylinder cutoff system that allows this 6.2-liter V8 to operate as a 3.1-liter V4 under light loads.

Corvette ZR1 fender vent close upComposite body

Jeremy Clarkson likes to call the Corvette a “plastic car,” and he’s technically correct. The first Corvette had a body made of glass-reinforced plastic (fiberglass), and ‘Vettes have eschewed metal bodywork ever since. It’s a great way to keep this sports car from gaining weight without jacking up the price.

Base versions of the current C6 Corvette still have fiberglass body panels, while the more expensive ZR1 has a carbon fiber hood, roof, front splitter, and rocker moldings to further trim weight.

Saying your car is made of boat-building materials isn’t the best way to get street cred, but C7 owners may not have to worry about that. We’ll have to wait for the C7’s Detroit debut to confirm this, but it is very likely that the new ‘Vette will have carbon fiber body panels.

1963 Chevrolet Corvette StingrayStyling

It’s no use having a great sports car if no one knows what it is. The first generation (C1) Corvettes had a distinct look, but today’s ‘Vette is most influenced by the design of the 1960s “Stingray” models. The 1963-67 model introduced styling cues, like the fastback roofline and four round taillights, that are still apparent on the C6. Its 1968 replacement lasted until 1982, a long life for any design.

Since then, Corvette styling changes have been so subtle that, in the case of the C5-C6 transition, some critics complained that Chevy’s designers had pulled a Porsche and not actually changed anything.

Major styling changes are unusual, but it’s not like the Corvette is a bad-looking car. Like the 911, the Corvette has maintained a distinctive look over many decades. That’s why one of the biggest changes expected for the C7 will be the taillights: they’ll be square, not round.

2013 Chevrolet Corvette ZR1 burnoutValue

Big engines and lightweight bodywork are great, but they’re even better when they don’t break the bank. The Corvette is, after all, a Chevy, so it has always been a relative bargain compared to sports cars from premium brands.

A base Corvette C6 does 0 to 60 mph in 4.2 seconds and has a top speed of 190 mph. A Porsche 911 Carrera S does 0 to 60 mph in 4.3 seconds, and has a top speed of 188 mph. However, the Corvette has a base price of $49,600, while the 911 starts at $96,400. The Corvette is basically a 911 for Boxster money.

Even the $112,600 ZR1 is a relative bargain. It can do 0 to 60 mph in 3.4 seconds and reach a top speed of 205 mph. A Ferrari 458 Italia does 0 to 60 mph in 3.0 seconds, and has a top speed of 203 mph, but it costs over $280,000.

Of course, even cheapness has a price. Corvettes are infamous for their rental car-grade interiors, and you’ll never see anything like Porsche’s PDK double-clutch transmission in a car with a Chevrolet badge. A Corvette will never be as refined as a 458, either.

Still, for buyers looking for performance and nothing else, the Corvette is a compelling bargain. With an expected base price of around $55,000, the C7 should be the same.

Stephen Edelstein
Stephen is a freelance automotive journalist covering all things cars. He likes anything with four wheels, from classic cars…
Eaton, Treehouse to boost home capacity for EV charging, energy storage
eaton treehouse ev charging news releases

Power-management firm Eaton likes to point out that when it launched in 1911, it invested in a new idea -- the very first gear-driven truck axle -- just at a time when both transportation and power management were on the cusp of dramatic change.
More than 113 years later, Eaton is again seeking to lead innovation in the current energy transition.
The power-management firm just signed a deal with Treehouse, an AI, software-enabled installation platform for electrification projects. The end goal: accelerating the electrification of homes for electric-vehicle (EV) charging, energy storage, or heat pumps, while seeking more efficiency and cost savings.
“At Eaton, we’re all-in on the energy transition and we’re making it happen at scale by delivering breakout technologies and industry collaborations needed to delight customers and make it more accessible and affordable,” says Paul Ryan, general manager of Connected Solutions and EV Charging at Eaton.
The partnership will ensure consumers are provided with accurate and fast pricing, as well as access to licensed electricians to deliver code-compliant installations, the companies say.
The collaboration also integrates into Eaton’s “Home as a Grid” approach, which supports the two-way flow of electricity, enabling homeowners to produce and consume renewable energy when they need it, Eaton says.
“For more than a century, power has flowed in one direction—from centralized power plants into homes,” the company says. “Today, there’s a new reality thanks to solar, electric-vehicle charging, energy storage, digitalization, and more.”
Projects to change homes and EVs into energy hubs have multiplied recently.
Last month, Nissan joined ChargeScape, a vehicle-to-grid (V2G) venture that is already backed by BMW, Ford, and Honda. ChargeScape’s software wirelessly connects EVs to power grids and utility companies, enabling consumers to receive financial incentives for temporarily pausing charging during periods of high demand. Eventually, consumers should also be able to sell the energy stored in their EVs’ battery back to the power grid.
In August, GM announced that V2G technology will become standard in all its model year 2026 models. And Tesla CEO Elon Musk has hinted that Tesla could introduce V2G technology for its vehicles in 2025.

Read more
Chrysler, Dodge, Jeep and EVs offer big incentives as year nears its end
chrysler dodge jeep ev incentives record my24 hybrid gallery 04 exterior desktop jpg image 1440

It’s no secret that automakers and dealerships typically climb over each other to offer the best incentives before the year ends. But this year’s sales season is expected to be particularly competitive, with slowing sales translating to greater urgency to clear inventory.

According to research from Kelley Blue Book, the respected vehicle-valuation firm, overall incentives on new vehicle sales were up by 60% in October compared to the previous year.

Read more
Jeep, Ram EREVs will get 690-mile range with new Stellantis platform
A 2025 Ram 1500 Ramcharger sits in a vineyard.

Stellantis, the giant automotive group, is betting big on extending the range of both its hybrid and fully electric vehicles (EVs).

Last month, the company, which owns the Jeep, Dodge, and Ram brands in the U.S., invested nearly $30 million into an advanced wind tunnel at its research center in Auburn Hills, Michigan. The goal is to study airflow around a vehicle’s wheels and tires to further optimize its EVs and boost their range.

Read more