Skip to main content

How to reduce exposure to cell phone radiation

Cell phones do produce radiation, even if it’s quite limited. They use radiofrequency energy, which is a type of electromagnetic radiation. In general, the amount they put out is below the FCC’s safe limit, but some models output more RF energy than others.

Radiofrequency energy may have some adverse health effects. Even though most cell phones operate within a safe range, you may still want to reduce your exposure to their radiation. Here are some tips to help you reduce your exposure while you use your phone.

Recommended Videos

How to reduce exposure to cell phone radiation

1. Use hands-free and text messages wherever possible

Assuming that cell phone radiation is something you want to avoid, holding your smartphone up to your ear and speaking to friends for hours at a time is a big no-no.

Instead, use speaker phone or earphones. That way, you’ll be able to place your phone on a table or surface while still continuing to have a conversation. Or better yet, use your landline to call, if you have a landline phone.

In addition, send text messages instead of calling. Obviously, certain things need to be discussed in a conversation. But if you have something to say to a friend or family member that can be communicated via a text message, send a text message. You’ll also most likely save time.

And if you have to speak without using speaker phone or earphones, try to reduce the amount of time you spend talking.

2. Carry and keep your smartphone away from your body

Keeping your smartphone against your body is not the best thing to do if you want to reduce your exposure to cell phone radiation. So instead of walking around with your smartphone in your pocket, put it in your handbag, bag, or backpack.

Basically, carry it somewhere away from your body. For example, if in a car, put it in the glove compartment. If at home or work, put it on a table or desk.

3. Avoid using your phone when it has a low signal

The more energy your smartphone uses, the more RF energy it emits. This is particularly the case when your smartphone has a low cell signal (i.e. when only one or two cell signal bars are displayed). That’s because in areas with poor reception, your smartphone emits more RF energy in order to stay connected with the nearest towers.

If you’re in an area with a poor signal, wait until you move to an area with better reception before calling someone, if you can. Alternatively, send a text rather than call.

Likewise, if you’re in a car, bus, or train, try to avoid using your smartphone. Again, this is because your phone emits more RF energy as it tries to maintain a connection with nearby cell towers.

Lastly, when waiting for your call to connect, avoid holding your smartphone to your ears. This is because your phone emits more RF energy when making the initial connection.

4. Don’t sleep with your phone

A good way of reducing your exposure to cell phone radiation is to keep your phone away from you when you sleep. This means either switching it off completely or keeping it on airplane mode.

Alternatively, if you need to keep your smartphone connected (perhaps because you’re expecting a possible call in the night), put it somewhere on the other side of your bedroom.

Either way, don’t fall asleep with your smartphone still connected and in your bed.

5. Be careful when streaming

According to the California Department of Public Health, you should avoid holding your smartphone when streaming or downloading media. Doing either of these things increases the RF energy produced by your phone, so you want to make sure that you’re not holding it against your head when streaming or downloading.

If you tend to stream movies or music on your smartphone regularly, it may be a better idea to download your media first, and then watch or listen once the download has finished completely. In addition, it’s safer to put your smartphone in airplane mode when you’re watching a film or TV program or listening to music.

6. Be cautious of “shielding” products

You might see some “radiation shield” or other “shielding” products that claim to block RF energy, electromagnetic fields (EMF), or cell phone radiation. However, the U.S. Federal Trade Commission has in the past warned that there’s no evidence these products reduce your exposure to radiation emissions. 

As a matter of fact, the FTC has indicated on previous occasions that any product that interferes with the cellular signal from your smartphone may require it to emit higher levels of RF energy to make up for it. This strain would end up increasing your exposure levels rather than decreasing them.

Despite this, a small number of manufacturers have been able to develop cases and reduce radiation emissions. FCC-accredited labs tested these cases, which is a strong indicator that the products do what they say. DefenderShield and SafeSleeve are a couple of examples. Both cases have been formally tested and offer some protection from radiation emitted by your smartphone.

Even if you do buy one of these phone cases, we still strongly recommend that you employ the other safety measures outlined above. These steps will help you keep minimizing your exposure. 

Remember, cell phones give off minimal amounts of radiation and are not a massive cause for concern. Some phones, though, are worse than others in this department. RF energy has been proven detrimental to health, so it makes sense to implement a few common-sense changes to lower your radiation exposure if you can.

Simon Chandler
Former Digital Trends Contributor
Simon Chandler is a journalist based in London, UK. He covers technology and finance, contributing to such titles as Digital…
Best iPhone 15 deals: How to get Apple’s latest iPhone for free
The display on a green iPhone 15.

The iPhone 15 has been one of the most popular iPhones Apple has released, and even with the recently released iPhone 16 shaking up the lineup it could still be considered among the best phones on the market. It can be difficult to find Apple deals on newer Apple products but the iPhone 15 is also one of the best phone deals you can shop. With up to $730 in savings available at multiple carriers right now, you can walk away with a free iPhone 15. We’ve rounded up all of those details below, but if the Apple software ecosystem isn’t of particular interest to you there are plenty of Samsung Galaxy S24 deals, Samsung Galaxy S24 Ultra deals, and Google Pixel 8 deals available as well.
Today's best iPhone 15 deals

: Get the iPhone 15 for $580, down from its regular price of $730, with three free months of Apple TV+ included.
: Get the iPhone 15 128GB model for free with a new line and 36 months of bill credits.
: Get the iPhone 15 128GB model for free via 24 monthly bill credits when you trade-in an eligible device on a Go5G Next plan.
: Get the iPhone 15 128GB model for just $6 per month for 36 months (regularly $21 per month).

Read more
Apple quietly nixed this Apple Intelligence feature from iOS 18.2
Image Playground on iPad.

One of the most highly anticipated features of Apple Intelligence, Image Playground, has finally launched in the iOS 18.2 developer and public betas. This artificial intelligence tool, announced in June, enables users to create cartoon-like images from text descriptions. Unfortunately, at least in the beta version, one of Image Playground's announced features is missing.

As first noted on X (formerly Twitter) by @nicolas09f9 (via MacRumors), Image Playground was once expected to feature three design styles: Animation, Illustration, and Sketch. For whatever reason, the latter isn't a choice in the beta.

Read more
iOS 18.2 may make charging your iPhone even easier. Here’s how
A close-up view of the App Library page on the iPhone 16.

We've all been in a situation where we need to charge our phone quickly, but it can be hard to gauge just how much time it needs to spend on the charger before it gets a usable amount of juice. A feature coming to iOS 18.2 will tell you how much more time your phone needs, although we aren't quite sure yet when it will be released.

On Monday, iOS 18.2 beta 2 was released to developers. 9to5Mac spotted the codebase for this feature in their breakdown, stating that it will calculate the amount of time needed to reach a certain charge threshold based on how powerful the charger is. The framework was dubbed "BatteryIntelligence" within the code, but although it was present, the feature isn't finished. That likely means it has been added in for testing purposes, but won't be ready for full deployment for some time yet.

Read more