NASA attaches Perseverance rover to Atlas V rocket ahead of launch

By Georgina Torbet Published April 28, 2022

NASA’s Perseverance rover is one step closer to its journey to Mars, and has now been attached to the rocket that will carry it to the Red Planet.

The rover was previously stacked along with the Ingenuity helicopter before being attached to the descent stage which will lower it to the martian surface. The entire assembly then had to be transported across the country from NASA’s Jet Propulsion Laboratory in Pasadena, California, to the Kennedy Space Center in Florida.

Recommended Videos

The rover and other parts were enclosed in the rocket’s nose cone, which was then hoisted onto the top of the rocket 39 meters in the air. This was done using a 60-ton hoist located on the roof of NASA’s Vertical Integration Facility, allowing the parts to be physically and electrically connected.

NASA's Mars 2020 Perseverance rover waits to be lifted onto its Atlas V launch vehicle at the Cape Canaveral Air Force Station in Florida on July 7, 2020. — A crane stands at the ready to hoist the payload fairing, or nose cone, containing NASA’s Mars 2020 Perseverance rover onto the top of an Atlas V launch vehicle. The image was taken at the Vertical Integration Facility at Space Launch Complex 41 at Cape Canaveral Air Force Station in Florida on July 7, 2020. NASA/KSC

“I have seen my fair share of spacecraft being lifted onto rockets,” John McNamee, project manager for the Mars 2020 Perseverance rover mission at NASA’s Jet Propulsion Laboratory in Southern California, said in a statement. “But this one is special because there are so many people who contributed to this moment. To each one of them I want to say, we got here together, and we’ll make it to Mars the same way.”

The payload fairing, or nose cone, containing the Mars 2020 Perseverance rover — The payload fairing, or nose cone, containing the Mars 2020 Perseverance rover sits atop the motorized payload transporter that will carry it to Space Launch Complex 41 on Cape Canaveral Air Force Station in Florida. The image was taken on July 7, 2020. NASA/KSC

There have been several small delays to the planned launch, but the big day is still planned within the crucial window of late July to early August. The timing is important due to the rotation of the Earth and Mars around the sun, as launching the rocket this summer will allow the rover to travel to Mars in the most efficient way possible.

The current aim is to launch the mission on July 30 at the earliest, from Cape Canaveral in Florida. The window for launch runs until August 15, so there is still some wiggle room for delays due to weather or other factors. Whenever the rocket launches during this period, the rover is scheduled to land on Mars on February 18, 2021.

Topics

Georgina Torbet

Space Writer

Georgina has been the space writer at Digital Trends space writer for six years, covering human space exploration, planetary…

Space

NASA’s Space Launch System rocket arrives at Kennedy. Next stop: the moon

After completing its journey from NASA’s Michoud Assembly Facility aboard the Pegasus barge, teams with Exploration Ground Systems transport the agency’s powerful SLS (Space Launch System) core stage to NASA’s Kennedy Space Center’s Vehicle Assembly Building on July 23.

After completing its journey from NASA’s Michoud Assembly Facility aboard the Pegasus barge, teams with Exploration Ground Systems transport the agency’s powerful SLS (Space Launch System) core stage to NASA’s Kennedy Space Center’s Vehicle Assembly Building on July 23. NASA/Isaac Watson

NASA's epic Space Launch System rocket, standing 322 feet tall when fully stacked, has recently been on an similarly epic journey -- traveling from New Orleans to Florida via barge. The rocket began its journey more than two weeks ago, and having covered more than 900 miles has now arrived safe at the Kennedy Space Center.

Space

Perseverance rover finds tantalizing hints of possible ancient life on Mars

mars 2020 perseverance rover

NASA's Perseverance rover was sent to Mars with one big, ambitious aim: to see if life could ever have thrived on our neighboring planet. Although there's unlikely to be anything alive on Mars now, the planet was once similar to Earth, with a thicker atmosphere and plentiful water on its surface. And during this time, billions of years ago, microbial life could have survived there. Now, Perseverance has located some tantalizing indications of possible microbial life -- although it's too early for scientists to be sure.

The rover has been taking samples by drilling into the martian rock as it travels, and it's a recent sample from an area called the Cheyava Falls that has ignited interest. The rock, collected on July 21, has indications of chemical signatures and physical structures that could potentially have been formed by life, such as the presence of organic compounds. These carbon-based molecules are the building blocks of life; however, they can also be formed by other processes.

Space

How NASA is using AI on the Perseverance rover to study Mars rocks

akdjf alkjdhf lk

Space engineers have been using AI in rovers for some time now -- hence why today's Mars explorers are able to pick a safe landing site and to drive around a region autonomously. But something they haven't been able to do before now is to do science themselves, as most of that work is done by scientists on Earth who analyze data and point the rover toward targets they want to investigate.

Now, though, NASA's Perseverance rover is taking the first steps toward autonomous science investigation on Mars. The rover has been testing out an AI capability for the last three years, which allows it to search for and identify particular minerals in Mars rocks. The system works using the rover's PIXL instrument (Planetary Instrument for X-ray Lithochemistry), a spectrometer that uses light to analyze what rocks are made of. The software, called adaptive sampling, looks though PIXL's data and identifies minerals to be studied in more detail.