Project Flake concept car pictures

By Amir Iliaifar Published August 30, 2011

If the Project Flake Concept looks and sounds like science fiction, it is. The Flake started as a final project for designer Da Feng at Coventry University and features electro-hydraulic flaps and adaptive winglets.

The pictures and video feature the Flake in its third iteration, which uses 250 active body panels controlled by mini solenoids pulling on carbon nano-tube wires. The result is a body that can truly adapt to it’s surroundings and the task at hand. For example, the Flake’s body can in theory lay flat to decrease drag, hinge upward to slow the vehicle and collect solar power or open fully to help with dramatic cornering.

While the Flake is still a long ways from design table to production line, the ambitious and inventive designer has spoken with an ex-Williams Formula 1 engineer who said the idea and execution is sound, with a few more adjustments and tweaks.

Topics

Former Digital Trends Contributor

Associate Automotive Section Editor for Digital Trends, Amir Iliaifar covers the ever increasing cross-section between tech…

Cars

Mercedes-Benz Vision One-Eleven concept looks to the past for inspiration

Overhead view of the Mercedes-Benz Vision One-Eleven concept.

Mercedes-Benz this week unveiled a new electric concept car that looks back as well as forward. It's called the Vision One-Eleven, and it's a reminder that car designers have a long history of predicting the future.

The Vision One-Eleven is inspired by the C111 series of experimental vehicles that first appeared in 1969. With their aerodynamic styling, roof-hinged gullwing doors, and distinctive orange paint, the C111 cars became fixtures of auto show stands and car-magazine features throughout the 1970s. They were more than show cars, though, testing then-trendy ideas like fiberglass body panels and rotary engines.

Cars

Audi ActiveSphere concept is part luxury sedan, part pickup truck

Audi ActiveSphere concept car in a mountainous setting with a bike on the rear rack.

Audi unveiled the fourth and final member of its Sphere-branded series of concept cars, and the design study is unlike anything we've seen before. Called ActiveSphere, it's an electric luxury sedan with a generous amount of ground clearance that can turn into a pickup truck.

Created at the Audi Design Studio in Malibu, California, the ActiveSphere stretches approximately 196 inches long, 81 inches wide, and 63 inches tall, figures that make it about as long as the current-generation A6, 7 inches wider, and 6 inches taller. It wears a rounded exterior design characterized by thin headlights, a transparent piece of trim where you'd expect to find a grille, and a fastback-like silhouette.

Cars

Ram EV concept previews truck brand’s electric future

The Ram 1500 Revolution BEV concept was designed around an electric powertrain.

Electric pickup trucks are a hot trend in the auto industry, and Ram is late to the game. So the truck brand of massive automaker Stellantis needed to work hard to stand out.
Unveiled at CES 2023, the Ram 1500 Revolution BEV concept shows what Ram has in mind for its first production electric truck, which is scheduled to arrive in 2024. This concept version combines some features we’ve already seen on other electric trucks with a few clever new ideas. So while it may be revolutionary for the Ram brand, which is new to EVs, it’s more evolutionary when compared to other electric pickups.

Unmistakably electric
The Ram 1500 Revolution has the bulky appearance of a traditional truck, but with proportions that clearly mark it as an EV. With no need to accommodate an engine, the hood is much shorter. This allowed designers to make the cabin four inches longer than today’s internal-combustion Ram 1500 without shortening the bed, Ram claims. The grille is also smaller, although Ram compensated for this with a giant light-up logo and headlights with the same “tuning fork” elements as its current gasoline and diesel truck grilles.
The roofline is a bit lower and sleeker, which probably helps with aerodynamics, but like a traditional truck, the Revolution rolls on massive wheels and tires. The 35-inch tires are wrapped around 24-inch wheels with smooth covers and light-up elements. The charge port, meanwhile, is located in the driver’s side front fender. It makes a noise when the truck has started charging and blinks to show that charging is ongoing.
Like rival truck makers, Ram incorporated a frunk where the engine would normally be, plus the RamBox storage bins from its current trucks. Nearly every opening, including the tailgate, frunk, and charge port, is also power-operated.
Underpinning all of this power-operated convenience is the STLA Frame dedicated EV platform, one of four such platforms Stellantis plans to use for future EVs across its many brands, such as Chrysler and Jeep.