Skip to main content

Yamaha PDX-B11 Review

Yamaha PDX-B11
MSRP $179.95
“We’re not going lambaste the PDX-B11 and slap it with the worst Bluetooth speaker rating ever, but we certainly can’t recommend it, either.”
Pros
  • Clean, powerful midrange
  • Ample max volume
  • Rugged construction
Cons
  • Sharp, brittle upper register
  • Poor feature set
  • Occasional Bluetooth issues

Yamaha, purveyor of everything from motorcycles to grand pianos, has always had a firm footing in the audio industry. That’s why it was no surprise to us to find a Bluetooth speaker among the latest additions to its mammoth product line.

Recommended Videos

Dubbed the PDX-B11 (available at $150), the speaker strikes an original aesthetic with its tapered, octagonal design and rugged construction. However, it joins an aggressively expanding list of devices competing for your Bluetooth dollars. By the time you’re finished reading this, three Bluetooth speaker startups will have been created — OK, maybe we’re exaggerating, but not by much.

All of that competition means that even heavyweight conglomerates like Yamaha have to create serious value in order to make an impact in the wireless speaker arena. Since the PDX-B11 is one of the first Bluetooth speakers we’ve seen from Yamaha, we wondered if the device would have what it takes. After putting the speaker through its paces, here’s what we found.

Out of the box

The PDX-B11 reminds us of the sort of marine search light you’d expect to see the Gorton’s fisherman toting around. With its gleaming front screen and chrome wire handle, the speaker invoked visions of stormy tides and yellow raincoats. Inside the box we found only a small DC power cable, and some instructional material.

Features and design

This B11 is a fairly lightweight speaker for its size, shrouded by a thick shell of rugged plastic. Though Yamaha’s website only offers the speaker in black and grey, it is also available in green, white, and dark blue at Amazon.

yamaha pdx b11 portable bluetooth speaker tweeter macro
Image used with permission by copyright holder

The PDX-B11’s wired handle arches above a small control panel which houses a selection of rubberized buttons for volume, power and Bluetooth pairing. At the front is a pair of LEDs that indicate power and Bluetooth connection, colored green and blue respectively.

The metal speaker screen adorning the front face is relatively thick and riveted to the frame at each of the housing’s 8 points. Under the screen sit the B11’s two drivers, consisting of a 4-inch “woofer”, and a 1 3/8-inch tweeter.

It was when music taxed the upper treble region that the PDX B11 revealed its weakest attribute.

This speaker lacks several options that we’ve come to take for granted in this product category. While many entry-level speakers we’ve seen include extras like a carrying case and a USB port for smartphone charging, the B11 offers no frills. At the back panel we found only two inputs: a DC power input, and a 3.5mm aux input. Aside from the meager selection, we wondered at Yamaha’s exclusion of a cable for its aux input — not exactly a budget-busting accessory.

Perhaps most troubling, though, was our discovery that the B11 doesn’t include a rechargeable battery. In the uber-competitive Bluetooth speaker market, a Lithium-Ion battery is standard fare, so finding slots for a 6-pack of AA batteries had us shaking our head. Maybe we’ve been a bit spoiled, but requiring disposable batteries (or expensive rechargeables) seems like a straight-up 20th century move.

Bluetooth

Pairing the speaker was easily accomplished by pressing the pair button, and locating the device on our smartphone. In fact, the PDX-B11 ‘s Bluetooth connection was almost insidiously clingy. Even with the speaker turned off, we found our phone constantly connecting to it, as if communicating from beyond the grave. Like many wireless speakers, we also noticed a penchant for signal dropout once in a while. It wasn’t a frequent occurrence, but the connection was far from solid.

Audio performance

To evaluate the PDX-B11, we served up music using our iPhone 5.

We were generally satisfied with this speaker’s midrange response, anchored by the device’s capable 4 inch driver. The center and lower mids were pretty powerful on most of our test tracks, reproducing an impressive amount of sound. We found vocals to be notably clear and present in almost every genre. Snare and toms were often light, but were generally clean, revealing some nice stick work on rim shots. We also enjoyed electronic piano and synth patches, which had a crystalline clarity that was only slightly fragile.

Bass was rolled off pretty heavily at about 100 Hz — higher than some devices we’ve tested, but not out of the ordinary for smaller speakers. We heard a nice pulse in the lower mids on many tracks, but the low end was finicky. Once the speaker hit a certain line in the frequency spectrum, kick drums and bass lines could quickly go from thick hits to a boxy pop.

It was when music taxed the upper treble region that the PDX-B11 revealed its weakest attribute. Crash cymbals and tambourine were extremely sizzly on many songs. Treble was so hot and brittle, that we got tired of listening to the speaker in short order. Bright-sounding albums like Van Halen’s 1984 and lighter electric and acoustic guitar tracks often came through thin and tinny, as if they were being squished to fit through a tiny pinhole.

Conclusion

Some listeners may find the PDX-B11’s “clean and light” top end to their liking, but this speaker just isn’t our cup of tea, and not just because of its spitty treble. We’re still scratching our heads over the lack of a built-in rechargeable battery at this price point.

Still, the PDX-B11’s rugged design and punchy sound earns our respect as a potential portable for those who just need a speaker that can hang in rough environments and crank out some tunes. As such, we’re not going to lambaste this speaker and stick it with the worst Bluetooth speaker rating ever, but we certainly can’t recommend it.

For more options, check out our Bluetooth Speaker Round-up – or just look out your window. Bluetooth speakers are EVERYWHERE.

Highs

  • Clean, powerful midrange
  • Ample max volume
  • Rugged construction

Lows

  • Sharp, brittle upper register
  • Poor feature set
  • Occasional Bluetooth issues
Ryan Waniata
Former Digital Trends Contributor
Ryan Waniata is a multi-year veteran of the digital media industry, a lover of all things tech, audio, and TV, and a…
B&O’s latest speaker is a love letter to aluminum
Bang & Olufsen Beosound A5 in Spaced Aluminium.

Bang & Olufsen (B&O) has released a new version of its picnic basket-shaped Beosound A5 Bluetooth speaker that's wrapped entirely in aluminum. The company calls the new look Spaced Aluminium and says that you can swap the speaker's cover with two other available finishes -- Nordic Weave and Dark Oak. The Spaced Aluminium version is available for $1,399 starting October 26 from bang-olufsen.com and select retailers.

What's intriguing about the Spaced Aluminium's design is the way it uses an array of 3,500 individual aluminum discs to form the speaker grille.

Read more
Tivoli Audio’s Model Two Digital speaker abandons terrestrial radio
The Tivoli Audio Model Two Digital in white.

Tivoli Audio's new tabletop radio isn't a radio at all. The Model Two Digital ($449) works with Wi-Fi and Bluetooth and has a sleek new design that can be positioned horizontally or vertically. It eliminates the Model One Digital's oversized dial and screen in favor of a much simpler, single knob that does triple duty as the control for power, source selection, and volume. It also lacks an AM or FM tuner, making it the first Tivoli Audio "Model" series tabletop product to lack a terrestrial radio feature. The Model Two Digital is available for preorder starting September 19 and is expected to ship in November.

Tivoli Audio says the Model Two Digital, which is available in three color combos (walnut/gold, white/silver, and black/black), will appeal to the person that loves streaming and isn’t concerned about a traditional FM/AM radio feature because they can access their favorite terrestrial stations via apps like TuneIn. This effectively makes the Model Two Digital a wireless speaker.

Read more
B&O’s Beolab 8 wireless speaker uses AirTag tech to track you
Bang & Olufsen Beolab 8 top touch controls.

Ultra-wideband (UWB) technology is the secret sauce behind the super-precise location system built into Apple's AirTags, which provide a great way for you to track down lost items like keys. But Bang & Olufsen (B&O) has found a new use for UWB: Its Beoloab 8 wireless speaker uses it track you, or more accurately, your position in a room, so that it can keep you in its acoustic sweet spot.

The B&O Beolab 8, a stunning, all-aluminum wireless speaker that looks like it's floating in space, starts at $2,749 and will be available in October from bang-olufsen.com or at authorized retailers. That starting price can quickly climb depending on the finishes and type of stand you choose. It works with your home wireless network using Wi-Fi 6, or you can set up ad-hoc streaming connections using Bluetooth 5.3.

Read more